Delta Rockwell
Delta Rockwell
Is there a chance this is it?
I asked the question if this mailing address looks correct
PFC Doe, John
D-btry 2plt
1602 Batteman Rd
Fort Sill, OK 73503
And someone said I was missing the brigade number before the delta battery..well I found thing on the Ft.Sill website saying 1-78th FA etc etc and the remaining address was also 1602 Bateman Rd...Does that man he is in 1-78th or are there multiple battalions on that rd..because i was looking at other addresss for ft. sill and they said like 1-90th 2304 sumpter rd..then another 1-79th 4392 Rockwell rd..I couldnt find any other ones that were on bateman rd..So are my chances good thst he's in the 1-78th?
So his new address would be
PFC Doe,John
1-78th D-Btry 2plt
1602 Bateman Rd.
Ft.Sill, OK 73503
I just want to make sure the 1-78th is right
Joe: Beacause I want to send him something as a surprise
Why don't you just ASK him what exact address to use to make sure it gets to him.
Check out the Delta Rockwell listings below and save 20% to 70% off retail prices:
 |
 |
Delta Rockwell Multiple Spindle 16 Drill Press Assembly Variable Speed 4 Pos |  |
 |
US $2,199.95 | 1h 7m |
 |
Wood Lathe Chisel Holder from Delta Rockwell 11 Wood Lathe will fit many lathes | |
2 Bids | US $14.50 | 2h 2m |
 |
Rockwell Delta Super 900 Radial Arm Saw Track Arm Position Scale Pointer | |
|
US $12.99 | 3h 7m |
 |
Rockwell Delta Super 900 Radial Arm Saw Carriage Rip Rip Scale | |
|
US $12.99 | 3h 8m |
 |
Rockwell Delta Super 900 Radial Arm SawName and Serial ID PlatesBadgeModelID | |
|
US $14.99 | 3h 9m |
 |
DELTA ROCKWELL MILWAUKEE 17 DRILL PRESS SPIDER HANDLE 3 SPOKE PULL DOWN | |
0 Bid | US $99.99 | 3h 45m |
 |
NOS Delta Rockwell 2 button Locking Switch Cover | |
|
US $24.95 | 4h 8m |
 |
Toggle Switch Safety Key20Amp2 HPRockwellDeltaDewaltRyobitable saw etc | |
|
US $15.99 | 4h 10m |
 |
Delta Rockwell unisaw 34 450 Hand Wheel 930039913524 | |
1 Bid | US $25.00 | 19h 55m |
 |
Delta Rockwell unisaw 34 450 Hand Wheel 930039913524lock knob 422044120009S | |
0 Bid | US $35.00 | 20h 2m |
 |
Delta Rockwell unisaw 34 450 Arbor and Carriage Assembly Trunions | |
0 Bid | US $120.00 | 20h 16m |
 |
Delta Rockwell unisaw 34 450 motor pulley with the key | |
1 Bid | US $20.00 | 20h 20m |
 |
Delta Rockwell unisaw 34 450 cast iron base with fasteners | |
0 Bid | US $100.00 | 20h 26m |
 |
Delta Rockwell unisaw 34 450 fense railing fasteners | |
4 Bids | US $66.00 | 20h 32m |
 |
Delta Rockwell unisaw 34 450 cast iron table 2 extesion wings and fasteners | |
0 Bid | US $150.00 | 20h 38m |
 |
Delta Rockwell unisaw 34 450 blade guard | |
3 Bids | US $36.78 | 20h 44m |
 |
Delta Rockwell unisaw 34 450 Miter Gauge Assembly | |
3 Bids | US $20.50 | 20h 48m |
 |
NOS Delta Rockwell Fence Head Jet Lock NEW | |
|
US $74.95 | 1d 21m |
 |
Rockwell Delta Belt Disk Sander combo | |
0 Bid | US $640.00 | 1d 31m |
 |
31 403 BACK STOP FOR DELTA ROCKWELL BELT SANDER | |
|
US $129.95 | 1d 3h |
 |
Delta Rockwell 10 Radial Arm Saw ARM Complete 1990s model | |
|
US $200.00 | 1d 3h 21m |
 |
Very Clean Rockwell Delta Low Voltage Magnetic Starter Switch good to 75 HP | |
0 Bid | US $99.00 | 1d 5h 13m |
 |
VINTAGE DELTA ROCKWELL WOOD LATHE ANGLED TOOL REST | |
1 Bid | US $34.95 | 1d 5h 53m |
 |
VINTAGE DELTA MILWAUKEE ROCKWELL 14 BAND SAW WOOD METAL GEAR SHIFTER LEVER | |
0 Bid | US $24.95 | 1d 5h 53m |
 |
DELTA ROCKWELL 6X48 INDUSTRIAL BELT SANDER DRIVE DRUM CASTINGS | |
0 Bid | US $59.99 | 1d 5h 53m |
 |
VINTAGE DELTA ROCKWELL NO 690 4 WOOD LATHE TOOL REST | |
0 Bid | US $24.95 | 1d 5h 53m |
 |
NOS Delta Rockwell LH Heavy Duty Lathe Spindle nut | |
|
US $34.95 | 1d 6h 44m |
 |
Vintage Delta Rockwell Mortise Attachment Parts For 976 | |
|
US $40.49 | 1d 17h 59m |
 |
URETHANE BANDSAW TIRES FOR DELTA ROCKWELL MODEL 28 240 NEW 2 TIRE SET095 THICK | |
|
US $27.95 | 1d 21h 42m |
 |
URETHANE BANDSAW TIRES FOR DELTA ROCKWELL MODEL 28 240 NEW 2 TIRE SET125 THICK | |
|
US $39.95 | 1d 21h 50m |
 |
Porter Cable Rockwell Delta Field Coil 887416 360 362 | |
|
US $45.00 | 2d 6h 46m |
 |
Porter Cable Rockwell Delta Field Coil 860960 167 Power Block Plane | |
|
US $65.00 | 2d 6h 52m |
 |
Delta Rockwell Armature 690097 438023350031 31 205 8 Table Saw | |
|
US $55.00 | 2d 8h 7m |
 |
Vintage 34 600 Delta Rockwell 9 Table saw Rear Trunnion Bracket 6C | |
|
US $35.99 | 2d 17h 43m |
 |
DELTA ROCKWELL RETRACTABLE RETRACTING CASTER WHEELS BAND SAW BELT DISC SANDER | |
|
US $149.99 | 2d 17h 44m |
 |
Delta Rockwell contractor Table saw Rear Trunnion Bracket 6A | |
|
US $29.99 | 2d 17h 45m |
 |
2 Rockwell Delta Table Saw 34 335 Altvend Trunnion 11A | |
|
US $26.99 | 2d 17h 45m |
 |
Rockwell Delta Table Saw 34 335 Metal Frt Gear Quadrant 21A | |
|
US $26.99 | 2d 17h 45m |
 |
14 Band Saw Table Brackets Fit Delta Rockwell Buffalo Reliant | |
|
US $39.95 | 2d 20h 45m |
 |
Delta Rockwell Retractable Caster Set flared foot band saw scroll jointer LQQK | |
5 Bids | US $89.34 | 3d 2h 53m |
 |
DELTA ROCKWELL Vintage 3 4 HP TEFC 3450 RPM 1 Phase Electric Motor 62 020 | |
|
US $169.00 | 3d 4h 50m |
 |
NOS Delta Rockwell Drill Press Motor Mount | |
|
US $49.95 | 3d 6h 21m |
 |
Delta Rockwell Drive Pulley 1313196 34 080 Miter Box | |
|
US $7.95 | 3d 11h 1m |
 |
Delta Rockwell 10 Contractor 34 440 Tablesaw Ft Trunnion 11A | |
|
US $74.99 | 3d 18h 19m |
 |
Delta Rockwell 10 Contrac 34 440 Tablesaw Rer Trunnion 11A | |
|
US $69.99 | 3d 18h 19m |
 |
Delta Rockwell Base 406030050002 31 550 6 Belt Sander Finishing Machine | |
|
US $100.00 | 3d 22h 40m |
 |
Delta Rockwell Base Bracket Mount 32 293 unknown item vintage | |
|
US $75.00 | 3d 22h 45m |
 |
Delta Rockwell Arm Bracket Mount Miter Saw 20 268 vintage | |
|
US $25.00 | 3d 23h 17m |
 |
Delta Rockwell Blade Guard Upper Housing 1313354 | |
|
US $30.00 | 3d 23h 28m |
 |
Rockwell Delta Heavy Duty Wood Lathe Variable Speed | |
|
US $750.00 | 3d 23h 33m |
 |
Rockwell Delta 8 Jointer Planer | |
|
US $650.00 | 3d 23h 41m |
 |
Name Model Plates From Delta Rockwell 11 Wood Lathe Model 46 111 Used | |
0 Bid | US $17.99 | 3d 23h 41m |
 |
12 Tool Rest DDL12 From Delta Rockwell 11 Wood Lathe Model 46 111 Used NIC | |
0 Bid | US $49.99 | 3d 23h 41m |
 |
Cup Center 3 1 2 Long Adjustable point From Vintage Delta Rockwell Wood Lathe | |
0 Bid | US $9.99 | 3d 23h 41m |
 |
3 Face Plate DDL180 From Delta Rockwell 11 Wood Lathe Model 46 111 Used Nice | |
1 Bid | US $17.99 | 3d 23h 41m |
 |
Name Serial Number Plates 2 stuck mistake Vintage Delta Rockwell Wood Lathe | |
0 Bid | US $29.99 | 3d 23h 41m |
 |
Tailstock Assembly From Delta Rockwell 11 Wood Lathe Model 46 111 Used NICE | |
0 Bid | US $69.99 | 3d 23h 41m |
 |
6 Face Plate From Delta Rockwell 11 Wood Lathe Model 46 111 or Others w Box | |
0 Bid | US $19.99 | 3d 23h 41m |
 |
4 Tool Rest DDL 4 From Delta Rockwell 11 Wood Lathe Model 46 111 or Others | |
0 Bid | US $19.99 | 3d 23h 41m |
 |
Delta Rockwell Base 1313152 34 080 Miter Saw | |
|
US $60.00 | 4d 3m |
 |
Delta Rockwell Base Miter Saw unknown model and part number vintage | |
|
US $60.00 | 4d 14m |
 |
Delta Rockwell Miter Saw Blade Guard Cover 1313355 | |
|
US $20.00 | 4d 30m |
 |
Delta Rockwell Belt Guard Plate 1088314 34 348 34 410 34 429 34 430 34 445 | |
|
US $20.00 | 4d 35m |
 |
Delta Rockwell Guard 424023540022 33 268 33 276 33 310 33 336 33 390 Radial Saw | |
|
US $75.00 | 4d 47m |
 |
NEW Delta ROCKWELL 50 010 DUST COLLECTOR HOSE | |
|
US $69.00 | 4d 1h 57m |
 |
Delta Rockwell Craftsman Moulding Molding Cutter Knives 1 Straight New | |
0 Bid | US $11.95 | 4d 2h 56m |
 |
VINTAGE DOUBLE SHAFT DELTA ROCKWELL MOTOR 1 3 HP DUAL VOLTAGE 110 230 | |
2 Bids | US $11.50 | 4d 3h 42m |
 |
Rockwell Delta Homecraft8 Tilting Table Saw Base Housing Casting 34 160 | |
|
US $14.99 | 4d 7h 8m |
 |
Rockwell Delta Homecraft8 Tilting Table Saw Front Rear Gibs Slides34 160 | |
|
US $9.99 | 4d 7h 14m |
 |
Rockwell Delta Homecraft8 Tilting Table SawGib Wedge Screws 34 160 | |
|
US $9.99 | 4d 7h 17m |
 |
Delta Rockwell 12 wood Lathe Tailstock Parts | |
0 Bid | US $40.00 | 4d 7h 18m |
 |
Rockwell Delta Homecraft8 Tilting Table SawVertical Elevation Shaft Ay34 160 | |
|
US $21.99 | 4d 7h 22m |
 |
Rockwell Delta Homecraft8 Tilting Table SawHorizontal Elevation Shaft34 160 | |
|
US $12.99 | 4d 7h 23m |
 |
Delta Rockwell 12 wood Lathe Tailstock 1 | |
0 Bid | US $100.00 | 4d 7h 24m |
 |
Rockwell Delta Homecraft8 Tilting Table Saw Rear Trunnion Clamp 34 160 | |
|
US $18.99 | 4d 7h 24m |
 |
delta rockwell 12 wood Lathe Tailstock 2 | |
0 Bid | US $80.00 | 4d 7h 27m |
 |
Rockwell Delta Homecraft8Tilting Table SawBlade Tilt Scale Pointer34 160 | |
|
US $12.99 | 4d 7h 29m |
 |
Delta or Rockwell UNIGARD for a Unisaw table saw | |
0 Bid | US $200.00 | 4d 8h 32m |
 |
DELTA ROCKWELL 1 BELT SANDER GRINDER IDLER WHEELS | |
|
US $39.99 | 4d 17h 44m |
 |
Delta Rockwell 24 inch Scroll Saw 40 204 Jig Saw Kit | |
|
US $59.95 | 4d 18h 7m |
 |
NOS Delta Rockwell 24 Scroll Saw Rotating Blade Guide | |
|
US $9.95 | 4d 18h 32m |
 |
NEW Delta Rockwell Spindle Sander Sanding 3 Drum | |
|
US $17.95 | 4d 18h 33m |
 |
Large Delta Cast Iron Knob old vintage Rockwell Delta | |
|
US $14.95 | 4d 18h 34m |
 |
NOS Delta Rockwell 12 Standard Duty Lathe Bed | |
|
US $299.95 | 4d 18h 52m |
 |
46 430 OFF SET TOOL REST BASE FOR DELTA ROCKWELL | |
|
US $134.79 | 4d 23h 13m |
 |
Delta Unisaw TableSaw HANDLE 7 3 4 shaft metal rockwell 51A | |
|
US $84.99 | 5d 58m |
 |
DELTA ROCKWELL 10 UNISAW 230v SINGLE PHASE W EXTRAS DELTA ROLLING BASE | |
|
US $1,000.00 | 5d 3h 42m |
 |
BLADE GUIDE FOR 24 DELTA ROCKWELL MILWAUKEE SAW 40 440 | |
0 Bid | US $5.00 | 5d 4h 5m |
 |
Delta Rockwell 14 Bandsaw table taper pin Delta part LBS 55 | |
|
US $4.99 | 5d 15h 1m |
 |
ROCKWELL DELTA 904100314506 1 2 X 3 4 SPACER NEW | |
|
US $18.00 | 5d 15h 29m |
 |
ROCKWELL DELTA 904100314507 3 4 X 3 4 SPACER NEW | |
|
US $18.00 | 5d 15h 29m |
 |
ROCKWELL DELTA 904100314508 3 4 X 1 SPACER NEW | |
|
US $18.00 | 5d 15h 29m |
 |
ROCKWELL DELTA 426040795004 SPANER NUT 20 BAND SAW | |
|
US $70.00 | 5d 15h 29m |
 |
Rockwell 855 321 Delta D855 321 Gear Assembly | |
|
US $29.99 | 5d 23h 26m |
 |
Delta Rockwell 34 440 Tablesaw Angle Tilting Shaft worm GEAR 11A | |
|
US $45.99 | 6d 1h 55m |
 |
New old Stock Delta Rockwell Grinder Wheel for Jointer | |
|
US $19.95 | 6d 4h 23m |
 |
Delta Rockwell 24 Scroll Saw Internal Guide Pin Slide | |
|
US $49.95 | 6d 4h 27m |
 |
VINTAGE 1960s 14 ROCKWELL DELTA MILWAUKEE BAND SAW STAND MINT | |
|
US $129.99 | 6d 5h 30m |
 |
14 ROCKWELL DELTA BAND SAW 3 COVERS FOR THE UPPER LOWER WHEEL BANDSAW | |
|
US $74.99 | 6d 5h 41m |
|
31-403 Back Stop For Delta Rockwell Belt Sander Renovo Parts 31-403 Back Stop for Delta Rockwell Milwaukee 6 x 48 inch Belt or Belt Disc Sanders. This is a faithful, near exact reversed engineered reproduction including the classic ball levers. Can be used to prevent stock from being carried along with the belt and works well with 31-014 fence available seperately. Introductory Price $129.95 Shipping weight 5 lbs. PLEASE: 1. READ DESCRIPTIONS,CAREFULLY VIEW PICTURES AND ASK ALL QUESTIONS BEFORE BIDDING. 2. USE OUR SHIPPING CALCULATOR AT THE Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. |
|
Delta Rockwell 34-155 Unifence Adapter Kit jacks_tools Store NEW DELTA ROCKWELL 34-155 UNIFENCE ADAPTER KIT NEW DELTA ROCKWELL UNIFENCE ADAPTER KIT PART NUMBER 34-155 PAYMENTS IF YOU ARE PAYING BY PAYPAL...PAYMENT IS DUE WITHIN 3 DAYS IF PAYMENT IS NOT RECEIVED IN THAT TIME PERIODS ITEMS WILL BE RELISTED DAMAGED ITEMS IN THE UNLIKELY EVENT AN ITEM ARRIVES DAMAGED, PLEASE CONTACT US IMMEDIATLEY KEEP ALL ORIGINAL PACKING MATERIALS RE-PACK IT IN THE SAME WAY YOU RECEIVED IT SHIPPER WILL BE NOTIFIED TO PICK-UP ITEM TO PROCESS A CLAIM...PLEA Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. |
|
Telescopic Steady Rest For Delta Rockwell 11" Lathe New Tools4cheap Telescopic style steady rest with adapter custom made to fit Delta Rockwell 11" lathes. Cast iron frame rest has steel telescoping fingers with brass tips. Adapter is located to rest with 2 dowel pins and it is all held together with included nut/bolt. Fits perfectly.Note: Please do not email to ask if this will fit any other lathe. It will not unless you make your own base adapter and clamp. I have been asked this 2-3x a week on my dozen or so models for the past 5+ years, yet Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. |
|
Delta Rockwell Shaper Spindle Adapter 43-190 DELTA ROCKWELL SHAPER SPINDLE ADAPTER 43-190 NEW DELTA ROCKWELL SHAPER SPINDLE ADAPTER PART 43-190 Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. |
|
Delta Rockwell 402020515002 Spindle Sleeve jacks_tools Store NEW DELTA ROCKWELL 402020515002 SPINDLE SLEEVE NEW DELTA ROCKWELL SPINDLE SLEEVE PART NUMBER 402020515002 PAYMENTS IF YOU ARE PAYING BY PAYPAL...PAYMENT IS DUE WITHIN 3 DAYS IF PAYMENT IS NOT RECEIVED IN THAT TIME PERIODS ITEMS WILL BE RELISTED DAMAGED ITEMS IN THE UNLIKELY EVENT AN ITEM ARRIVES DAMAGED, PLEASE CONTACT US IMMEDIATLEY KEEP ALL ORIGINAL PACKING MATERIALS RE-PACK IT IN THE SAME WAY YOU RECEIVED IT SHIPPER WILL BE NOTIFIED TO PICK-UP ITEM TO PROCESS A CLAIM...PLEA Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. |
Rockwell Automation Delta Robot
Large snow goose flight expected
Delta Waterfowl anticipates large fall flight of snow geese
You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
