Spline Drive

Spline Drive
chevy rear end splines?

Are the number of splines in a 2 wheel drive 5 lug rear end the same as the 6 lug 4 wheel drive rear end ? Can the axles be swapped from one to the other without any problems if the year and gear ratio are the same?

you just asked a question without any needed info. go find out what rear end you have Chevy has two, and what size. even after all that you have to measure the brake plate to plate distance. So even if you have two 8 bolt spicer rear ends it may not work. On some Chevy's they use clips to hold the rear end in and on others they are bolted.Measure and look. If they are both the same bolt # the same plate to plate distance and the axle is held in the same way it will probably work. Some time to pull the axle you have to yank really "F" ing hard. most times it is just a little tap with a BFH
GM is kinda funny it does not always make a differance if the axle is a 4,5, or 6, lug brake drum

Check out the Spline Drive listings below and save 20% to 70% off retail prices:

Job Lot Of 34 3 4x22x28 concrete RELTON SPLINE DRIVE HAMMER BIT 202 12 28
Job Lot Of 34 3 4x22x28 concrete RELTON SPLINE DRIVE HAMMER BIT 202 12 28
$700.00
27pce Ratchet Bit Drive Tool Set Torx Spline Star Philips Hex Bits 2286
27pce Ratchet Bit Drive Tool Set Torx Spline Star Philips Hex Bits 2286
$24.37
NEW Bosch HA1020 Spline Drive to SDS Plus Adapter for Rotary Hammers
NEW Bosch HA1020 Spline Drive to SDS Plus Adapter for Rotary Hammers
$54.88
Vim Products XZN400 9 Piece Xzn Triple Square Spline Drive Bit Set
Vim Products XZN400 9 Piece Xzn Triple Square Spline Drive Bit Set
$47.32
BOSCH HA1020 Spline Drive To SDS Plus Arbor Adapter
BOSCH HA1020 Spline Drive To SDS Plus Arbor Adapter
$69.95
STAR DRIVER BIT SOCKET SPLINE DRIVE HEX TORX TOOL SET FOR POWER DRILL OR WRENCH
STAR DRIVER BIT SOCKET SPLINE DRIVE HEX TORX TOOL SET FOR POWER DRILL OR WRENCH
$47.95
New Metabo Concrete Drill Bit 4 Cutter Spline Drive 5 8 X 5 X 10
New Metabo Concrete Drill Bit 4 Cutter Spline Drive 5 8 X 5 X 10
$26.95
DH38YE2 Spline Drive Rotary Hammer Drill 84 A
DH38YE2 Spline Drive Rotary Hammer Drill 84 A
$430.77
Bosch HA1020 Spline Drive to SDS Plus Adapter for Rotary Hammers New
Bosch HA1020 Spline Drive to SDS Plus Adapter for Rotary Hammers New
$50.97
Hilti 1 3 8 Spline Drive Rotary Hammer Bit
Hilti 1 3 8 Spline Drive Rotary Hammer Bit
$120.00
5508E 5 Spline Drive Impact Locking Extension 8
5508E 5 Spline Drive Impact Locking Extension 8
$95.00
RELTON Spline Drive Hammer Bit  202 8 14 Dia 1 2 DD 8 Oal 14 NEW
RELTON Spline Drive Hammer Bit 202 8 14 Dia 1 2 DD 8 Oal 14 NEW
$9.95
Bosch HA1020 Spline Drive to SDS Plus Adapter for Rotary Hammers Free Shipping
Bosch HA1020 Spline Drive to SDS Plus Adapter for Rotary Hammers Free Shipping
$62.74
3 8x 11 Spline Drive Hammer Drill Masonry Bit HC4501 by Bosch
3 8x 11 Spline Drive Hammer Drill Masonry Bit HC4501 by Bosch
$27.49
1 2x 16 Spline Drive Hammer Drill Masonry Bit HC4511 by Bosch
1 2x 16 Spline Drive Hammer Drill Masonry Bit HC4511 by Bosch
$32.99
2 3 8 Rotary Core Drill Bit Spline Drive Carbide Concrete
2 3 8 Rotary Core Drill Bit Spline Drive Carbide Concrete
$79.99
BOSCH HS1814 Spline Drive Hammer Steel Bull Point
BOSCH HS1814 Spline Drive Hammer Steel Bull Point
$18.81
Milwaukee 48 03 3562 Spline Drive Core Bit Shank 12 Inch
Milwaukee 48 03 3562 Spline Drive Core Bit Shank 12 Inch
$49.99
3 4x 11 Spline Drive Hammer Drill Masonry Bit HC4530 by Bosch
3 4x 11 Spline Drive Hammer Drill Masonry Bit HC4530 by Bosch
$33.99
Bosch HA1020 Spline Drive to SDS Plus Adapter for Rotary Hammers Free Shipping
Bosch HA1020 Spline Drive to SDS Plus Adapter for Rotary Hammers Free Shipping
$49.88
NEW BOSCH T2817 Rotary hammer bit For spline drive rotary hammers 13 8
NEW BOSCH T2817 Rotary hammer bit For spline drive rotary hammers 13 8
$59.99
MILWAUKEE 48 20 4037 SPLINE DRIVE CARBIDE BIT 3 8 X 10 48 20 4037 NEW
MILWAUKEE 48 20 4037 SPLINE DRIVE CARBIDE BIT 3 8 X 10 48 20 4037 NEW
$16.50
RELTON 25 ROTARY CORE DRILL BIT S28TL10 Hex Spline Drive Carbide Concrete
RELTON 25 ROTARY CORE DRILL BIT S28TL10 Hex Spline Drive Carbide Concrete
$56.00
BOSCH HS1817 Spline Drive Hammer Steel Scaling Chisel
BOSCH HS1817 Spline Drive Hammer Steel Scaling Chisel
$20.44
NEW Bosch HA1020 Spline Drive to SDS Plus Adapter for Rotary Hammers
NEW Bosch HA1020 Spline Drive to SDS Plus Adapter for Rotary Hammers
$54.04
MILWAUKEE 48 20 4056 SPLINE DRIVE CARBIDE BIT 9 16 X 10 48 20 4056 NEW
MILWAUKEE 48 20 4056 SPLINE DRIVE CARBIDE BIT 9 16 X 10 48 20 4056 NEW
$11.25
POWERS 01419 SPLINE DRIVE CARBIDE BIT 5 8 X 13 01419 NEW
POWERS 01419 SPLINE DRIVE CARBIDE BIT 5 8 X 13 01419 NEW
$18.75
Hilti 1 3 8 Spline Drive Rotary Hammer Bits LOT OF 3
Hilti 1 3 8 Spline Drive Rotary Hammer Bits LOT OF 3
$270.00
Hilti 1 3 8 Spline Drive Rotary Hammer Bit LOW PRICE
Hilti 1 3 8 Spline Drive Rotary Hammer Bit LOW PRICE
$120.00
Bosch HA1020 Spline Drive to SDS Plus Adapter
Bosch HA1020 Spline Drive to SDS Plus Adapter
$50.98
BOSCH HS1816 Spline Drive Hammer Steel Scaling Chisel
BOSCH HS1816 Spline Drive Hammer Steel Scaling Chisel
$17.99

 


 
MILWAUKEE 48204062 Hammer Drill Bit, Spline, 5/8x10 In
Hammer Drill Bit, Shank Shape Spline, Number of Cutter Heads 2, Bit Dia. 5/8 In., Drilling Length 5 In., Overall Length 10 In., Shank Size 3/4 In.

NB SSP 6 Ball Spline Nut, 6 mm Bore Dia x 25 mm L
Ball Spline Nut, Cylindrical, Bore Dia 6 mm, Inside Dia Tolerance +0/0.012mm, Outside Dia 14 mm, Outside Dia Tolerance +0/0.011 mm, Length 25 mm, Static Load Capacity 512 Lb, Temp Range 176 F, Carbon Steel Material, For Use With SSP6S

MILWAUKEE 48204053 Hammer Drill Bit, Spline, 1/2x27 In
Hammer Drill Bit, Shank Shape Spline, Number of Cutter Heads 2, Bit Dia. 1/2 In., Drilling Length 22 In., Overall Length 27 In., Shank Size 3/4 In.

NB SSPF 8 Ball Spline Nut, 8 mm, 25 mm L
Ball Spline Nut, Flanged, Bore Dia 8 mm, Overall Width 32 mm, Overall Length 25 mm, Flange Dia 32 mm, Flange Thickness 5 mm, Barrel Dia 16 mm, Mounting Hole Center 24 mm, Mounting Hole Dia 3.4x6.5x3.3 mm, Dynamic Load Capacity 325 Lb, Static Load Capacity 644 Lb, Load Capacity C 2.10 kN, For Use With NB Spline Shafts

NB SSPF 10 Ball Spline Nut, 10 mm, 33 mm L
Ball Spline Nut, Flanged, Bore Dia 10 mm, Overall Width 42 mm, Overall Length 33 mm, Flange Dia 42 mm, Flange Thickness 6 mm, Barrel Dia 21 mm, Mounting Hole Center 32 mm, Mounting Hole Dia 4.5x8x4.4 mm, Dynamic Load Capacity 613 Lb, Static Load Capacity 1138 Lb, Load Capacity C 4.40 kN, For Use With NB Spline Shafts


Profile BMX John Pringle explains the new Profile spline drive sprocket


 

 



 

 
Detroit For Sale, Some Assembly Required [Carpocalypse]
# carpocalypse The U.S. auto industry may have climbed back from the Carpocalypse , but it's still liquidating much of its old pieces, from forklifts to entire factories. David Traver Adolphus of Hemmings Blog shows what's on the block. More »

You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

Leave a Reply

XHTML: You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>